Rainwater pump failures, tank leaks, blocked filters, backflow device testing, overflow issues, and annual system servicing — diagnosed and repaired by a licensed Gold Coast plumber.
Water tank repair on the Gold Coast most commonly involves pump repair or replacement ($300–$1,200), leaking fitting repair at inlet, outlet, or overflow connections ($150–$400), first flush diverter replacement ($100–$250), and backflow prevention device testing and replacement ($200–$500). Cracked poly tanks can be repaired by plastic welding if the damage is localised, costing $200–$600 — severely degraded tanks require replacement. The most common pump fault is pressure switch failure (the automatic controller that activates the pump when a tap is opened), followed by dry-run protection activation when the tank runs empty. Annual servicing — including pump test, filter clean, first flush empty, and backflow check — costs $180–$350 and prevents unexpected failures. Properr Plumbing & Roofing (QBCC Licence 15085071) provides water tank repair across Coomera, Helensvale, Southport, Surfers Paradise, Robina, Burleigh Heads, Palm Beach, Mudgeeraba, Nerang, Tweed Heads, Beenleigh, Logan, and 20+ additional suburbs.
Failed, noisy, or underperforming rainwater pressure pumps — diagnosed, repaired, or replaced. Pressure switch, controller, motor, and impeller faults all serviced on-site.
Leaking fittings, cracked walls, failed overflow connections, and weeping inlet/outlet seals. Poly welding, fitting replacement, and sealant repair for repairable tank damage.
Blocked, broken, or missing first flush diverters and inlet filters. Replaced and reconfigured to ensure clean water enters the tank and debris is diverted correctly.
Annual testing and replacement of backflow prevention devices on tanks connected to house plumbing. Mandatory compliance testing to protect the mains water supply.
Blocked overflow pipes, disconnected gutter downpipe connections, failed leaf diverters, and overflow redirection to stormwater. Restored to correct flow paths.
Complete pre-season service — pump test, filter clean, first flush empty, fitting inspection, overflow check, backflow test, and water quality assessment.
A rainwater tank system is not just a tank — it's a collection of interconnected components that must all function correctly to deliver water reliably. The tank stores the water, the gutter connections and first flush diverter collect and filter incoming rainwater, the pump pressurises the water for household use, the backflow prevention device protects the mains supply, and the overflow manages excess water during heavy rain. When any one of these components fails, the system either stops delivering water, wastes water, or creates a compliance issue.
The pressure pump is the hardest-working component in a rainwater system. It activates every time a connected tap is opened, a toilet is flushed, or the washing machine fills — cycling dozens of times per day. The typical residential rainwater pump has a 5–10 year service life depending on brand, usage frequency, and water quality (sediment in the tank accelerates impeller and seal wear). The pressure switch or automatic controller — the electronic component that detects when a tap is opened and starts the pump — is the most failure-prone part. It can fail stuck-on (pump runs continuously), stuck-off (pump doesn't activate), or intermittently (pump cycles erratically). Controller replacement costs $150–$400 and restores normal operation without replacing the entire pump.
Tank leaks fall into two categories. Fitting leaks — water seeping from the inlet, outlet, overflow, or pump connection — are caused by loose fittings, perished rubber washers, or overtightened connections that have cracked the tank wall around the fitting. These are straightforward repairs: remove the fitting, clean the surfaces, replace the washer or O-ring, and retighten to the correct torque. Structural leaks — cracks in the tank wall itself — are caused by UV degradation (the tank plastic becomes brittle after 15–20 years of sun exposure), impact damage (lawnmowers, falling branches), or ground movement (subsidence beneath the tank base creating uneven stress). Small structural cracks can be repaired by poly welding; extensive cracking or general brittleness means the tank has reached end of life and needs replacement.
For related services, see our water tank installation, outdoor plumbing repair, leak repair, and our full service range.
Controller, switch or motor
Supply & install new pump
Inlet, outlet or overflow
Poly welding or compound
Annual compliance test
Full system check
Common questions answered by our licensed roofing professionals.
We provide professional water tank repair services across 30+ suburbs throughout Gold Coast, South Brisbane, and Tweed Shire.
Contact Properr Plumbing & Roofing for professional water tank repair. Pumps, leaks, filters, backflow, and annual servicing. Gold Coast, South Brisbane, and Tweed Shire.